13200mAh Mini DC UPS for 12V Routers, WiFi & CCTV Cameras

Keep your WiFi, router and CCTV running during power interruptions with this compact 13200mAh Mini DC UPS. Can run two 12v devices simultaneously + Runs devices up to 9-11 hours. Designed specifically for 12V devices, it provides seamless backup power so your internet and security cameras stay online. Includes a splitter cable so you can power two devices at once. Simply use your existing 12V adapter — no extra power supply needed.

This backup unit is made for 12V devices like routers, WiFi, and CCTV. When the electricity goes off, it keeps those devices running so you can stay online and keep your security system working.

 Features & Benefits 

• Seamless Backup Power – Automatically takes over when the main power is interrupted so your devices stay on without restarting.
• Dual Device Support – Includes a splitter cable so you can power two 12V devices at the same time (e.g. router + camera or router + fibre ONT).
• Clear Status Lights – Charge light shows charging status; Work light shows when the unit is supplying backup power.
• Compact & Easy to Install – Small mini UPS design that sits neatly near your router or camera setup.
• Safety Protection – Built-in protection against overcharge, short circuit, and overcurrent.
• Uses Your Existing Adapter – Simply plug in your current 12V power supply to charge the unit.
• Seamless backup for 12V routers, fibre ONTs, WiFi and CCTV cameras
  
• Long runtime — approximately 8+ hours on a standard router (up to 9–11 hours on lighter devices

How It Works

1. Plug your existing 12V power supply into the input port to charge the unit.

2. Connect your router, camera or other 12V device to the output port.

3. When the main power is interrupted, the unit automatically takes over and keeps your devices running.

4. The work light turns on while it is supplying backup power.

Important Notes

• Only for 12V devices – Check the label on your current power adapter. It must say 12V. Not suitable for 5V, 9V, 15V or 24V/PoE devices.
• Power supply not included – You must use your existing 12V adapter.
• No low-battery warning – The unit switches off when the battery is empty. Charge it fully whenever power is available.
• Combined load should stay within the 2.5A / 30W limit when using two devices.

Please note: This unit uses your existing 12V power supply. The PSU cable is not included.

The problem it solves
When load shedding starts, your router and cameras usually switch off straight away. That means no WiFi, no work-from-home connection, and no camera monitoring. This mini UPS keeps 12V devices running without needing a full inverter.

Selling Points

• Stay connected during load shedding
• Keep WiFi on for work, school, and streaming
• Keep CCTV / cameras running
• Cheaper and simpler than a big home inverter
• Can power 2 devices with the included splitter cable
• Easy to use once connected

Perfect for:

• 12V routers and modems
• WiFi and fibre setups
• CCTV and security cameras
• Other 12V appliances

Key Features:

• 13200mAh backup battery (48.84Wh)
• Made for 12V devices
• Around 8 hours+ backup on a standard router
• Includes splitter cable to power 2 devices
• Charge light and work light
• Compact mini UPS design
• Uses your existing 12V power supply

Important: The unit will switch off without warning when the battery runs out.

Will this keep my WiFi and cameras on during load shedding?
Yes, if they are 12V devices. This Mini DC UPS takes over when the power cuts so your router, WiFi, and CCTV can stay on. It is not made for 9V or 15V/24V PoE devices.

How long does it last?
Around 8 hours or more on a standard 12V router. Lighter routers can last closer to 9–11 hours. Cameras and higher-draw devices will run for less. Runtime depends on what you plug in.

Is this only for 12V routers?
Yes. Check the label on your current adaptor. It must say 12V. If it says 5V, 9V, 15V, or 24V, this unit is the wrong one — message us on Facebook with a photo of the label and we will point you to the right product.

Does it include a power supply?
No. It uses your existing 12V charger. In the box you get the Mini DC UPS, a splitter cable, and a user manual. The 12V PSU is not included.

Can I power two devices at once?
Yes. A splitter cable is included so you can run two 12V devices from one unit, for example a router and a camera. Keep the combined draw within the 12V output limit (max 2.5A).

Is it plug and play?
Once connected, yes. Charge the unit with your 12V supply, plug your device into the output, and leave it. When Eskom cuts, it supplies backup power. The work light comes on while it is giving backup.

Will it warn me before it dies?
No. The unit switches off without warning when the battery is empty. Charge it fully whenever power is back so you are ready for the next slot.

What’s in the box?
1 × 13200mAh Mini DC UPS, 1 × splitter cable, 1 × user manual.
Not included: 12V power supply.

Is shipping free?
Yes. This unit is R500, which is over our R250 free-shipping threshold. Most orders arrive in 2–5 working days.

What if I’m not sure it will fit?
Send a photo of your router or camera power label on Facebook at [your Facebook page]. We will confirm it is 12V before you pay.

What if I buy the wrong one?
Message us on Facebook within 7 days of delivery with your order number and a photo of the adaptor label. We will help with an exchange or return.

Specifications:

• Capacity: 13200mAh (48.84Wh)
• Battery: 18650 cells, 2200mAh x 6
• Input: 12V 2000mA
• Output: 12V 2000mA / DC 12V (Max 2.5A)
• Power: 30W
• Interface: Female 5.5 x 2.1 input; Female 5.5 x 2.5 output
• Cable length: may vary between 50cm and 100cm

What’s in the Box:

• 1 × Mini DC UPS
• 1 × Splitter cable
• 1 × User Manual

Not included:

• 12V PSU / power supply cable

Stay online and stay ready with PowerReady SA.